58
JetPort 5208/5216 User’s Manual
Finishing Up:
The JETPORT 5208 / JETPORT 5216's serial port settings and the computer's
COM port settings must be the same. Change the JETPORT 5208 / JETPORT
5216's settings for the port you are connecting the computer to (see
Port
Config
,), so that they match the ones you just set in the dialog boxes (as
shown in the table below):
Parameter
Value
Bit per second:
115200
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
Hardware (RTS/CTS)
Logging In:
1. Double click the icon you created in the
Dial-up Network
folder.
2. Key in your Username and Password, then click
Connect
.
3. Use Telnet, SSH, or your browser to access the JETPORT 5208 /
JETPORT 5216 the same way as if you were accessing it over the net.