3
Chapter 4. Administration
If no IP addresses are specified on this page, anyone can open a TCPIP Telnet
session to a RAW TCP port by specifying the IP address and port number of
the port – without having to specify a Username and Password.
Once specific IP addresses are entered here, however, only users logging in to
the JETPORT 5208 / JETPORT 5216 from one of those IP addresses can
have access to the RAW TCP ports without having to specify a Username and
Password.
Note:
The port must be designated as a
RAW TCP Port
under the
Port Config
settings. See
Operating Mode
.
Session Info
Clicking the
Session Info
button brings up the Active Sessions display:
This display lets the administrator see at a glance all the users currently logged
into the JETPORT 5208 / JETPORT 5216, and provides information about
each of their sessions. It also gives the administrator the option of forcing a
user logout by selecting the user and clicking
End Session
.