49
Chapter 6. Out of Band Operation
4. For the
Connect using:
field, select
Direct to COM1
(assuming you are
using COM1 on your PC), then click
OK
. A
Port Setting
dialog box
similar to the one below comes up:
5.
For OOBC connections, the JETPORT 5208 / JETPORT 5216's serial
port settings and the computer's COM port settings must be the same.
Change the settings in your dialog box (if necessary), so that they match
the JETPORT 5208 / JETPORT 5216's Console Port settings (see
Port
Config
for details), then click OK.
Note:
The JETPORT 5208 / JETPORT 5216's default settings are 9600
bps; 8 Data bits; No Parity; No Stop bits, but you can change these to
something more suitable to your installation as long as they both
much.