71
Chapter 7. Virtual Port Management
Port Mapping and Unmapping
Port Mapping
To map a Real COM port:
1. Double click your Target item in the Port List to brings up the
Port
Mapping
dialog box:
2. Drop down the list of available COM ports and select the COM port you
wish to map the Target port to.
3. Click
OK
to complete the operation.
Note:
1. If a range of ports was selected, and
Map consecutively
is enabled, the
COM ports are mapped to the Target ports in sequence based on the
port numbers.
2. Only
Real Mode
ports are mapped. Other ports in the range are
passed over.