36
Trunk Size:
The switch can support up to 5 trunk groups. Each trunk group can support up
to 8 member ports. Since the member ports should use same speed/duplex, max groups
for 100M ports would be 4, and 1 for gigabit ports.
Group ID:
Group ID is the ID for the port trunking group. Ports with same group ID are in
the same group.
Type: Static
and
802.3ad LACP.
Each Trunk Group can only support Static or 802.3ad
LACP. Choose the type you need here.
Aggregation Status
This page shows the status of port aggregation. Once the aggregation ports are negotiated
well, you will see following status.
Group ID:
Display Trunk 1 to Trunk 5 set up in Aggregation Setting.
Type: Static or LACP set up in Aggregation Setting.
Aggregated:
When LACP links well, you can see the member ports in Aggregated
column.
Individual:
When LACP is enabled, member ports of LACP group which are not
connected to correct LACP member ports will be displayed in the Individual column.
Link Down:
When LACP is enabled, member ports of LACP group which are not linked up
will be displayed in the Link Down column.
