19
User name
: You can key in new user name here. The default setting is
admin
.
Password
: You can key in new password here. The default setting is
admin
.
Confirm Password
: You need to type the new password again to confirm it.
Once you finish configuring the settings, click on
Apply
to apply your configuration.
Figure 4.2.2.2 Popup alert window for Incorrect Username.
4.2.3 IP
Configuration
This function allows users to configure the switch’s IP address settings.
DHCP Client
: You can select to
Enable
or
Disable
DHCP Client function. When DHCP
Client function is enabled, an IP address will be assigned to the switch from the network’s
DHCP server. In this mode, the default IP address will therefore be replaced by the one
assigned by DHCP server. If DHCP Client is disabled, then the IP address that you
specified will be used instead.
IP Address
: You can assign the IP address reserved by your network for your JetNet. If
DHCP Client function is enabled, you don’t need to assign an IP address to the JetNet, as
it will be overwritten by DHCP server and shown here. The default IP is 192.168.10.1.
