47
RSTP Summary
JetNet 5008G-P# show spanning-tree summary
Switch is in rapid-stp mode.
BPDU skewing detection disabled for the bridge.
Backbonefast disabled for bridge.
Summary of connected spanning tree ports :
#Port-State Summary
Blocking Listening Learning Forwarding Disabled
-------- --------- -------- ---------- --------
0 0 0 2 8
#Port Link-Type Summary
AutoDetected PointToPoint SharedLink EdgePort
------------ ------------ ---------- --------
9 0 1 9
Port Info
JetNet 5008G-P# show spanning-tree port detail fa6 (Interface_ID)
Rapid Spanning-Tree feature Enabled
IEEE compatible Spanning-Tree Protocol Enabled
Spanning-Tree BPDU transmission-limit 3
Bridge identifier has priority 32768, address 0012.77ff.0510
Configured hello time 2, max age 20, forward delay 15
Current root has priority 32768, address 0012.7700.0112
Root port is 8 , cost of root path is 200000
Topology change flag not set, detected flag not set
Number of topology changes 1, last change occurred from 0000.0000.0000
Times: hello 2 , max age 20 , forward delay 15
Timers: hello 0 , topology change 0
Rapid Spanning-Tree admin-link-type : Auto
Rapid Spanning-Tree oper-link-type : Point-to-Point
Rapid Spanning-Tree admin-edge-port : Enabled
Rapid Spanning-Tree oper-edge-port : Edge
Port 128.6 as Designated Role is in Forwarding State
Port Path Cost 200000, Port Identifier 128.6
Designated root has priority 32768, address 0012.7700.0112
Designated bridge has priority 32768, address 0012.77ff.0510
Designated Port ID is 128.6, Root Path Cost is 200000
Timers : message-age 0 sec, forward-delay 0 sec
Forwarding-State Transmit count 1
BPDU: sent 420 , received 0
TCN : sent 0 , received 0
Rapid Super Ring
Super Ring Enable
JetNet 5008G-P(config)# super-ring enable
Super Ring Version
JetNet 5008G-P(config)# super-ring version
<1-2> valid range is 1 or 2
JetNet 5008G-P(config)# super-ring version 2
Note: 1=Super Ring, 2=Rapid Super Ring.
Priority JetNet
5008G-P(config)# super-ring priority
<0-255> valid range is 0 to 255
JetNet 5008G-P(config)# super-ring priority 100
Ring Port
JetNet 5008G-P(config)# super-ring port
IFLIST Interface list, ex: fa1,fa3-5,gi8-10
JetNet 5008G-P(config)# super-ring port fa1,fa2
Dual Homing II
JetNet 5008G-P(config)# super-ring dual-homing enable
JetNet 5008G-P(config)# super-ring dual-homing disable
Ring Info
