background image

17

WARRANTY CARD 

 

Boiler serial number ______________         Boiler power ____10____kW 

 

User (surname, name) _________________________________________ 
Address (street, town, ZIP code) _________________________________ 

___________________________________________________________ 
___________________________________________________________ 

Contact (phone, fax)

__________________________________________ 

 

Adjustment according to the instructions for the boiler operation and 

installation is performed by a contractual service organization. 

 

The user confirms that:  

• the adjusted boiler by a contractual service organization has not 

shown out any defect at the heat test  

• has received „Operation and installation manual” with a proper filled 

in Warranty card 

• has been introduced to the boiler operation and maintenance, rules 

for using mastered ________________________________________ 

 

    (Users 

signature) 

 
 
 

___________________ 

Production date 

 

 
 
 

___________________ 

Stamp of the producer 

 

 
 
 

___________________ 

Checked by (signature) 

 

 
 
 

___________________ 

Installation date 

 

 
 
 

___________________ 

Assembly company 

(stamp, signature) 

 

 
 
 

___________________ 

User’s signature 

 

 
 
 

___________________ 

Date of putting boiler 

to the operation 

 

 
 
 

___________________ 

Contractual service 

organization (stamp) 

 

 
 
 

___________________ 

User’s signature 

 

The Warranty card without filling up is invalid. 

Summary of Contents for Kordi-10S





















Reviews: