Quando tutte le unità sono state accoppiate, le impostazioni verranno salvate e
la prossima volta che le unità vengono accese, verranno accoppiate
“automaticamente” con le precedenti impostazioni.
Si udirà il “bip” di connessione, il che significa che il prodotto è stato accoppiato
con successo. Ciò può essere confermato dal sagnale/parola COLLEGATO sul
tuo dispositivo smart.
A questo punto il LED del “Master” diventa blu fisso.
Se hai bisogno di accoppiare l’altoparlante a un nuovo dispositivo, bisogna
prima spegnere il Bluetooth sul telefono collegato. Aspettare 5 secondi e poi
collegarlo con il nuovo dispositivo.
9.Configurazione del collegamento di molteplici altoparlanti
Prima del primo utilizzo, disattivare la funzione Bluetooth di qualsiasi altro
dispositivo Bluetooth vicino agli altoparlanti.
6.Impostazioni del volume
Scegliere l’unità “Follower” da collegare.
Premere l’interruttore On/Off per circa 3 secondi sulla prima unità. Si udirà un
suono di avvio e la spia LED blu lampeggerà su entrambe le unità.
Passo 7:
Passo 8:
Per completare l’accoppiamento, premere due volte sul pulsante ON/OFF
“Master” – a questo punto il LED blu lampeggerà di nuovo velocemente.
7.Accoppiamento a un nuovo telefono
Passo 3:
Premere una volta il pulsante ON/OF del “Follower” – a questo punto il LED blu
si spegnerà.
Se hai più di un prodotto Kooduu che desideri accoppiare, assicurati di seguire
le seguenti istruzioni.
8.Spegnimento del Synergy Pro
Per poter regolare il volume, utilizzare il dispositivo smart collegato per alzare
o abbassare il volume.
Per spegnere il prodotto, premere e tenere premuto il pulsante on/off fino allo
spegnimento della spia a LED.
Passo 1:
Scegliere l’unità che sarà la “Master”
Passo 4:
Passo 5:
Premere due volte il pulsante ON/OF dell’unità “Master” – a questo punto il LED
blu lampeggerà più lentamente.
Passo 2:
Passo 6:
Lasciare che il “Follower” si colleghi automaticamente all’altoparlante “Master”.
Quando la connessione tra il “Follower” e l’altoparlante “Master” è pronta,
udirai un “bip”.
Ripetere dallo Passo 5 allo Passo 7 con tutti i “Follower” che desideri
accoppiare all’unità “Master”.
L’unità “Master” ora è visibile sull’accoppiamento Bluetooth.
Entrare nel menu Bluetooth sul tuo dispositivo smart o computer e avviare
l’accoppiamento con Synergy PRO “Master”. Il LED lampeggerà velocemente.
Passo 11:
Passo 10:
Passo 9:
Ti verrà richiesto un codice. Il codice è “5 6 3 8”
NON PREMERE ALCUN PULSANTE ON/OFF DELL’UNITÀ “FOLLOWER”.
Passo 12:
Scegliere l’unità “Follower” da collegare.
Passo 4:
Passo 5:
Passo 2:
Individuare l’unità “Master”.
10.Aggiungere più unità “Follower” a un multi-sistema
esistente:
NOTA: Se non completi l’accoppiamento premendo due volte sul pulsante
ON/OFF “Master” non sarà stabilito alcun collegamento Bluetooth. Il
Bluetooth “Master” sarà visibile sul tuo dispositivo smart, ma non sarà
possibile alcuna connessione.
Passo 1:
Premere due volte sul “Master” (mentre l’unità è accesa).
Passo 3:
Premere una volta sul pulsante ON/OFF del “Follower” – a questo punto il LED
blu si spegnerà.
Lasciare che il “Follower” si colleghi automaticamente all’altoparlante “Master”.
Quando la connessione tra il “Follower” e l’altoparlante “Master” è pronta, si
udirà un “bip”.
NON PREMERE ALCUN PULSANTE ON/OFF SULL’UNITÀ “FOLLOWER”
ESISTENTE.
Passo 6:
Per completare l’accoppiamento, premere due volte sul pulsante ON/OFF
“Master” – a questo punto il LED blu lampeggerà di nuovo velocemente.
IT
34
35
IT
STATUS DEL LED
MODALITÀ
Spia LED Blu lampeggia
velocemente
Il prodotto è in modalità accoppiamento Bluetooth
Spia LED Blu lampeggia
lentamente
Il prodotto è in modalità “Master” – in attesa di
accoppiamento con le unità “Follower”
Spia LED blu è fissa
Il prodotto è accoppiato al Bluetooth con un
dispositivo smart
Il prodotto è acceso – Spia LED
è spenta
Il prodotto è in modalità “Follower” – in attesa di
accoppiamento con l'unità “Master”
La 2ª Spia LED è ROSSA
Il prodotto è collegato con un caricatore USB ed è
in carica
La 2ª Spia LED è Verde
Il prodotto è collegato con un caricatore USB ed è
completamente carico
MODALITÀ
attuale
Indicatore
MODALITÀ LED
Premere
Pulsante
OFF
N/A
Premere 2 secondi
ON
(Nessuno)
Premere 2 secondi
Master – alla ricerca
dell'accoppiamento
del Follower
LED Blu lampeggia
lentamente
Premere due volte
Accoppiamento
Bluetooth Master
LED Blu lampeggia
velocemente
Premere una volta
Follower
LED Spento
Premere una volta
OFF
N/A
Tenere per 10
secondi (RESET)
Nuova
MODALITÀ
ON
OFF
Master –
Accoppiamento
Bluetooth
Follower
Master –
Accoppiamento
Bluetooth
Master –
Accoppiamento
Bluetooth
Indicatore
MODALITÀ LED
LED Blu lampeggia
velocemente
N/A
Accoppiamento
Bluetooth Master
LED Blu lampeggia
velocemente
Premere due volte
Master – alla
ricerca
dell'accoppiamento
del Follower
LED Blu lampeggia
lentamente
LED Blu lampeggia
velocemente
LED Spento
LED Blu lampeggia
velocemente
LED Blu lampeggia
velocemente
Summary of Contents for Synergy Pro Series
Page 1: ...SYNERGY PRO SERIES ...