Safety Instructions
PxV414 – 4U Platform User Manual
7
q
The device must be used in accordance with the instructions for use.
q
The electrical installations in the room must correspond to the requirements of
the respective regulations.
q
Take care that there are no cables, particularly power cables, in areas where
persons can trip over them.
q
Do not use a main connection in sockets shared by a number of other power
consumers. Do not use an extension cable.
q
Only use the main cable supplied.
q
Do not set up the device in the proximity of heat sources or in a damp
location. Make sure the device has adequate ventilation.
q
Only devices and components may be connected to the interfaces of the
system which fulfil the requirements of an SELV circuit (security low voltage
output) in accordance with EN60950.
q
In devices with -48 V DC PSU (PxV414-C) it is not allowed to remove or to
bridgeover the installed ATX-connector with the Kontron-ATX cable extension
(T10 A fuse integrated in the 3.3 V circuit).
q
All plugs on the connection cables must be screwed or locked to the housing.
q
The device is destined to be used in horizontal position.
q
It must be assumed that safe operation is no longer possible,
– if the device has visible damage or
– if the device no longer functions.
In these cases the device must be shut down and secured against
unintentional operation.
q
Only original accessories approved by Kontron Embedded Computers have to
be used.
For DC powered systems
q
The DC-input should not exceed 60V DC and must fulfil SELV Requirements
of EN60950 standard.
q
The DC/DC-supplies don’t fulfil the requirements for centralized DC-Power
systems as required for the use in USA. That kind of units are not allowed to
be used as a stand-alone computer.