Assembly, Disassembly
PxV414 – 4U Platform User Manual
29
Replace the Lithium Battery
The SBC board is equipped with a lithium battery. To replace the battery please
proceed as follows:
1.
Open the unit as described in chapter “Installing the Additional Cards”
(step 1-5).
2.
If your system is expanded with additional cards, please remove at first the
cards situated directly near the SBC card and the corresponding data cables.
3.
Remove the battery by pressing outwards the ejector spring (as marked in the
pictures).
4.
Place the new battery in the socket.
5.
Make sure that you insert the battery the right way around. The plus pole
must be on the top!
6.
The lithium battery must be replaced with an identical battery or a battery type
recommended by Kontron Embedded Computers.
7.
Reinstall the removed additional cards and reconnect the removed data
cable.
8.
Close the Unit as described in chapter “Installing the Additional Cards”
(step 6-7)
Fig. 15: Lithium battery placement
1
4
3
2
1
Battery ejector spring
2
Lithium battery
3
Battery socket
4
SBC card