Installation Instructions
PxV414 – 4U Platform User Manual
31
The 19" industrial cabinet must stand firmly in place. You can
improve its stability by placing the components into it from the
bottom up. Heavy components should be placed down below.
If further stabilization is necessary, then bolt the 19" industrial
cabinet to the floor or anchor it on the wall.
The voltage feeds must not be overloaded. Adjust the cabling
and the external overcharge protection to correspond with the
electrical figures indicated on the type label.
The type label is located on the right side of the device.
For DC power supplies please observe that the supply circuit
must withstand loads minimum 50A for the 24V power supply and
25A for the -48V power supply.