Installation Instructions
30
PxV414 – 4U Platform User Manual
Installation Instructions
Instruction for Installation in a 19” Cabinet
If you want to expand your system with additional cards or
supplementary drives, than do this before installing the PxV414
into the 19” industrial cabinet.
Please observe at that place the details included in the chapter
“Accessing Internal Components”.
Before mounting the PxV414 – 4U Platform in a cabinet, you
must connect your peripheral devices to the system interfaces.
Refer to chapter “Ports on the Rear Panel ” for the description of
the interfaces.
Important Instructions!
The PxV414 has to be installed and operated only by trained and
qualified personal.
Since the device may weigh up to 20 kg, it is advisable to have a
colleague assist in the installation.
Only install the PxV414 into the 19”-industrial cabinet with
corresponding mounting rails.
Make sure to check the load capacity of the mounting rails (the
unit may weigh up to 20 kg)
Make sure there is sufficient air circulation around the device
when installing the PxV414 – 4U.
The openings for air intake and exhaust on the
device and the 19" industrial cabinet must be not obstructed.
When installing in a 19" cabinet, leave at least 5 cm of space free
around the unit to prevent the device from possibly overheating!