Safety Instructions
6
PxV414 – 4U Platform User Manual
Safety Instructions
Please read this section carefully and observe the instructions for your own
safety and correct use of the device.
The chapter also contains information on approval and interference suppression
of your system.
Observe the warnings and instructions on the device and in the manual.
The PxV414 is built and tested by Kontron Embedded Computers in accordance
with EN60950/VDE0805 and left the works in a perfectly safe condition.
In order to maintain this condition and ensure safe operation, the user must
observe the instructions and warnings contained in this manual.
Kontron Embedded Computers can only guarantee the safety, reliability and
performance of the device if all of the following safety instructions are observed.
Caution:
Energy hazards
>
240 VA are present inside the chassis!!!
Only qualified personnel and/or by Kontron Embedded Computer
authorized persons are permitted to work inside the system or handling
expansion cards!!!!
q
Maintenance or repair on the open device may only be carried out by qualified
personnel authorized by Kontron Embedded Computers familiar with the
associated dangers.
q
The device may only be opened for the installation and removal of ISA/PCI
cards in accordance with the description in this manual. These procedures
have to be carried-out only by qualified specialist personnel.
q
If extensions are made to the device the legal stipulations and the device
specifications must be observed.
q
The device must be switched off and the power cord disconnected from the
power source before insertion of a PCI/ISA cards.
q
The unit is not completely disconnected from the main power source by
turning off with the power on/off button.
The unit is complete disconnected from the main power source, only when the
power cord is disconnected either from the power source or from the unit.
Therefore the power cord and its connectors must always remain easily
accessible.