KBox A-103 – User Guide, Rev. 3.0
// 74
Sub-Screen
Function
Second level Sub-Screen / Description
Uncore
Configuration>
(continued)
IGD – LCD
Control>
(continued)
Mode
Persistance
Enables/Disables Mode Persistance
[Disabled, Enabled]
Center Mode
Select the Display Device that should be centered.
[Disabled, CRT, EFP, EFP2]
GMCH BLC
Control>
Back Light Control Setting
[PWM-Inverted, GMBus-Inverted, PWM-Normal, GMBus-Normal]
South Cluster
Configuration>
PCI Express
Configuration>
PCIe 0 Speed>
Configure PCIe Speed
[Auto, Gen1, Gen2]
PCIe 1 Speed>
Configure PCIe Speed
[Auto, Gen1, Gen2]
PCIe 2 Speed>
Configure PCIe Speed
[Auto, Gen1, Gen2]
PCIe 3 Speed>
Configure PCIe Speed
[Auto, Gen1, Gen2]
PCI Express Root
port 0>
Control the PCI Express Root Port
[Enable, Disable]
PCI Express Root
port 1>
Control the PCI Express Root Port
[Enable, Disable]
PCI Express Root
port 2>
Control the PCI Express Root Port
[Enable, Disable]
PCI Express Root
port 3>
Control the PCI Express Root Port
[Enable, Disable]
USB
Configuration>
xHCI Mode>
Mode of operation of xHCI controller. Thiswill also
influence EHCI controller settings since certain
combinations of those modes are not allowed. ’Smart
Auto’ mode is supposed to solve USB issues under
Windows 7.
[Smart Auto, Enable, Disable]
Default depends on OS selection.
EHCI Controller> Read only field
[Enable]
Default depends on OS selection.
USB Per-Port
Control>
Control each of the USB ports (0~3) disabling
[Disable, Enable]
USB Port #0>
Disable USB Port
[Disable, Enable]
USB Port #1>
Disable USB Port
[Disable, Enable]
USB Port #2>
Disable USB Port
[Disable, Enable]
USB Port #3 >
Disable USB Port
[Disable, Enable]
XHCI Link Power
Management>
Enable/Disable XHCI Link Power Management
[Disable, Enable]
USB0 Power
Enable>
USB0 Power Enable or Disable
[Disabled, Enabled]
