Kontron CP6006-SA, User Manual

Page: 75 / 90

CP6006-SA – User Guide, Rev. 0.5 Preliminary
www.kontron.com // 75
COMMAND IPMI 2.0
SPEC.
SECTION
NETFN CMD KONTRON SUPPORT
ON IPMI
CONTROLLER
Suspend/Resume Payload Encryption 24.3 App 55h O / Yes
Set Channel Security Keys 22.25 App 56h O / No
Get System Interface Capabilities 22.9 App 57h O / No
CHASSIS DEVICE COMMANDS O
Get Chassis Capabilities 28.1 Chassis 00h O / Yes
Get Chassis Status 28.2 Chassis 01h O / Yes
Chassis Control 28.3 Chassis 02h O / Yes
Extended Chassis Control Commands 28.4 to 28.8 Chassis 03h, 04h,
0Ah, 05h,
06h
O / No
Set Power Cycle Interval 28.9 Chassis 0Bh O / Yes
Extended Chassis Control Commands 28.11 to 28.13 Chassis 07h to 09h O / No
Get POH Counter 28.14 Chassis 0Fh O / Yes
EVENT COMMANDS M
Set Event Receiver 29.1 S/E 00h M / Yes
Get Event Receiver 29.2 S/E 01h M / Yes
Platform Event (a.k.a. “Event Message”) 29.3 S/E 02h M / Yes
PEF AND ALERTING COMMANDS 30.1 to 30.8 S/E 10h to 17h O / No
SENSOR DEVICE COMMANDS M
Get Device SDR Info 35.2 S/E 20h M / Yes
Get Device SDR 35.3 S/E 21h M / Yes
Reserve Device SDR Repository 35.4 S/E 22h M / Yes
Get Sensor Reading Factors 35.5 S/E 23h O / No
Set Sensor Hysteresis 35.6 S/E 24h O / Yes
Get Sensor Hysteresis 35.7 S/E 25h O / Yes
Set Sensor Threshold 35.8 S/E 26h O / Yes
Get Sensor Threshold 35.9 S/E 27h O / Yes
Set Sensor Event Enable 35.10 S/E 28h O / Yes
Get Sensor Event Enable 35.11 S/E 29h O / Yes
Re-arm Sensor Events 35.12 S/E 2Ah O / No
Get Sensor Event Status 35.13 S/E 2Bh O / No
Get Sensor Reading 35.14 S/E 2Dh M / Yes
Set Sensor Type 35.15 S/E 2Eh O / No
Get Sensor Type 35.16 S/E 2Fh O / No
FRU DEVICE COMMANDS M
Get FRU Inventory Area Info 34.1 Storage 10h M / Yes
Read FRU Data 34.2 Storage 11h M / Yes
Write FRU Data 34.3 Storage 12h M / Yes
SDR DEVICE COMMANDS O
Get SDR Repository Info 33.9 Storage 20h O / Yes
Get SDR Repository Allocation Info 33.10 Storage 21h O / Yes