CP6006-SA – User Guide, Rev. 0.5 Preliminary
// 23
Sockets
Front Panel Connectors
VGA: one 15-pin, D-Sub connector, J9
USB: two 4-pin, type A connectors, J6 and J7
Ethernet: three 8-pin, RJ-45 connectors, J10, J11 and J12
Serial port: one 8-pin, RJ-45 connector, J8 (COMA)
XMC front panel bezel cutout
Onboard Connectors
One XMC connector, J20
Two SATA connectors
One 7-pin, standard SATA connector, J14
One M.2 socket (J18)
One JTAG connector, J15
One XDP-SFF (debug) connector, J19
Four CompactPCI connectors J1, J2, J3 and J5
Two ZDplus high-speed serial rear I/O connectors, J4 and J41 (PICMG 2.20)
(CP6006X-SA)
Two 260-pin DDR4 SODIMM sockets, J16 and J17
(optional four sockets; two on the rear side of the board, J25 and J26)
LEDs
Front Panel LEDs
IPMI LEDs:
I0/I1 (red/green):
Software status of the IPMI controller
System Status LEDs:
WD (green):
Watchdog status
TH (red/green):
Temperature status
HS (blue):
Hot swap status
General Purpose LEDs:
LED3–0 (red/green/amber):
General purpose
/
POST code
Ethernet LEDs:
ACT (green):
Network
link / activity
SPEED (green/orange):
Network speed
Switches
DIP Switches
Two onboard DIP switches, SW1 and SW2 for board configuration on the rear side of
the board
Reset Switch
One hardware reset switch on the front panel
Hot Swap Switch
One switch for hot swap purposes integrated in the front panel in accordance with
PICMG 2.1 Rev. 2.0
Timer
Real-Time Clock
Real-time clock with 256 Byte CMOS RAM; battery-backup available
Watchdog Timer
Software-configurable, two-stage Watchdog with programmable timeout ranging
from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
System Timer
The Intel® SoC contains three 8254-style counters with fixed uses.
In addition to the three 8254-style counters, the Intel® SoC includes eight individual
high-precision event timers that may be used by the operating system. They are
implemented as a single counter each with its own comparator and value register.
