CP6006-SA – User Guide, Rev. 0.5 Preliminary
// 39
2.7.10.
CompactPCI Connectors
The complete CompactPCI connector configuration comprises
up to four standard connectors (2mm Hard Metric) designated
as J1, J2, J3 and two high-speed serial ZDplus connectors, J4 and
J41.
Their functions are as follows:
J1 and J2: 64-bit CompactPCI interface with PCI bus
signals, arbitration, clock and power
J3 and J5 with standard rear I/O interface functionality
J4 and J41 for high-speed serial rear I/O interconnection
The CP6006(X)-SA is designed for a CompactPCI bus
architecture. The CompactPCI standard is electrically identical
to the PCI local bus. However, these systems are enhanced to
operate in rugged industrial environments and to support
multiple slots.
2.7.10.1.
Connector Keying
The CompactPCI connector J1 supports guide lugs to ensure a
correct polarized mating.
The CP6006(X)-SA supports universal PCI VI/O signaling
voltages with one common termination resistor
configuration and includes a PCI VI/O voltage detection
circuit. If the PCI VI/O voltage is 5 V, the maximum
supported PCI frequency is 33 MHz.
Figure 7: Compact PCI Connectors
