NetBootLoader
AM4100
Page 5 - 16
ID 36126, Rev. 2.0
P R E L I M I N A R Y
DESCRIPTION:
The command BW displays the parameter “<time>” setting.
The parameter “<time>” stipulates the waiting time in seconds that
the boot operation is delayed before the image is loaded and started.
No values other than these are supported.
Bear in mind when setting the boot wait time that the user specific
LED (ULED0) blinks green slowly. Therefore, if the boot wait is set to
2 seconds the LED will only blink approximately four times.
The option “-f” is used to force updating of the CRC value of boot
section of the EEPROM.
For further information refer to chapter 5.4.3.1.
USAGE:
Display setting of “<time>” parameter
COMMAND / RESPONSE:
bw
WaitTime: 20
Set boot wait time to 50 seconds
COMMAND / RESPONSE (none):
bw 50
B Y E
FUNCTION:
Terminate an FTP server session
SYNTAX:
bye
DESCRIPTION:
An FTP server session which has been established with the
command LOGIN is terminated with the command BYE.
B W
Summary of Contents for AM4100
Page 19: ...AM4100 Introduction ID 36126 Rev 2 0 Page 1 1 Introduction Chapter 1 1 P R E L I M I N A R Y...
Page 57: ...AM4100 Installation ID 36126 Rev 2 0 Page 3 1 Installation Chapter 1 3 P R E L I M I N A R Y...
Page 65: ...AM4100 Configuration ID 36126 Rev 2 0 Page 4 1 Configuration Chapter 1 4 P R E L I M I N A R Y...
Page 89: ...AM4100 NetBootLoader ID 36126 Rev 2 0 Page 5 1 NetBootLoader Chapter 1 5 P R E L I M I N A R Y...
