Konsberg Simrad PX MultiSensor Mk2, Instruction Manual, Page: 22 / 42

20
454200/A
When a sensor is mounted on a trawl door, the pitch and roll measurements may
need to be calibrated.
12 Select
Program Sensor
to transfer the chosen parameters to the sensor.
13 Disconnect the sensor from the interface cable and the computer.
Related topics
Installation on the trawl door, page 15
Installation on the clump, page 16
Frequencies and channels, page 38
Calibration, page 21
Installation on the wing, page 16
Installation on the headrope, page 17
Checking the offset values for every measurement, page 33
Verifying the value defined for the blanking zone, page 34
Checking the range setting of a measurement, page 35
Simrad PX MultiSensor Mk2 Instruction Manual