koenner-soehnen.com
|
14
In case of any damages, occurred due to non-perfor-
mance of regular maintenance works, the manufacturer
bears no responsibility for such damages.
IMPORTANT!
TECHNICAL MAINTENANCE WORKS
9
Works, specified in “Technical maintenance” section, are to be regularly performed. If the the generator
user has no possibility to perform regular maintenance independently, it is necessary to address the official
service center to registrate an order for such works performance.
SUCH DAMAGES ARE ALSO:
SUCH DAMAGES ARE ALSO:
• Damages occurred as a result of using non original spare parts;
• Corrosion damages and other results of improper equipment storage;
• Damages occures as a result of maintenance performance by inexperienced and unauthorized specialists.
MANUAL COMPLIANCE
MANUAL COMPLIANCE
Technical maintenance, operation and
Könner & Söhnen
®
generator storage are to be performed
according to this manual recommendations. Manufacturer bears no responsibility for damages and losses,
caused by incompliance to safety requirements and technical maintenance rules.
FIRST OF ALL THIS APPLIES TO:
FIRST OF ALL THIS APPLIES TO:
- use of lubricants, gasoline and motor oils, forbidden by the manufacturer;
- device technical alterations;
- equipment operations against its intended use;
- indirect damages, caused by operating faulty equipment;
This manual compliance! You can find a list of service center addresses on the website of exclusive importer:
www.koenner-soehnen.com
Stop the engine before performing any maintenance
work. If the engine needs to run, make sure that the
room is ventilated. The exhaust contains toxic carbon
monoxide gas. After using the power plant, wipe it with
a cloth to avoid fire or corrosion.
ATTENTION - DANGER!
Summary of Contents for KS 18-1DE-G
Page 22: ......
