background image

koenner-soehnen.com   

|

   

1

INTRODUCTION

SAFETY INFORMATION

1

Thank you for your purchase of diesel power plant in noise-absorbing housing

 

Könner & Söhnen

® 

HEAVY DUTY Silent Diesel Generator 

series. This manual contains a brief description of safety, use and 

debugging.  More information can be found on the official manufacturer’s website in the support section: 

 

koenner-soehnen.com/manuals 

You can also go to the support section and download the full version of the manual by scanning the QR code, or 

on the website of the official importer of 

Könner & Söhnen

®

 products:

 www.koenner-soehnen.com

Manufacturer reserves the right to make alterations into the generators, which may not be reflected in this 

manual. Pictures and photos of the product may vary from its actual appearance. At the end of this manual, 

You may find contact information which you are free to use in case of any issues occurrence.
All data, specified in this operation manual is the most up to date for the moment of its publishing. The current 

list of service centers you can find at the website of official importer: 

www.koenner-soehnen.com

Do not use the generator in rooms with poor ventilation or in conditions of excessive humidity. Do not 

place the generator in water or on moist soil. Do not expose the generator to rain, snow, as well as to direct 

sunlight for a long time. Place the generator on a flat, hard surface, away from flammable liquids/gases (at 

a minimum distance of 1 m). Install the generator at a distance of not less than 1 m from the front control 

panel and not less than 50 cm on each side, including the upper part of the generator. Keep unauthorized 

persons, children, and animals away from work area. Wear safety shoes and gloves.

We care about the environment, therefore, we consider it expedient to save 

We care about the environment, therefore, we consider it expedient to save 

paper and leave in print a short description of the most important sections.

paper and leave in print a short description of the most important sections.

Be sure to read the full version of the manual before getting 

started!

Failure to follow the recommendations marked with this 

sign may lead to serious injury or death of the operator 

or third parties.

Useful information while operating the machine.

ATTENTION - DANGER!

IMPORTANT!

ELECTRICAL SAFETY

1.1

The generator produces electricity that may lead to an electric shock while neglecting compliance 

regulations. All connecting the generator to the network must be made by certified electrician in accordance 

with all electrical rules and regulations. Connect the generator to the protective ground before operation. 

Wires with damaged or spoiled insulation should be replaced. You should also replace worn, damaged or 

rusty contacts.

The device generates electricity. Follow safety precautions 

to avoid electric shock.

ATTENTION - DANGER!

Using device for other purposes deprives the right for 

free warranty. 

IMPORTANT!

Summary of Contents for KS 18-1DE-G
























Reviews: