Konica Minolta magicolor 1600W, Service Manual

Page: 99 / 216

11. Description of the control panel (magicolor 1650EN)
Field Service V er. 1.0 Nov. 200 8
62
magicolor 1600W magicolor 1650EN
Adjustment / Setting
11.1.3 Error messages
11.1.4 Malfunction messages
For details of malfunction messages and troubleshooting procedures, see “Malfunction
code”.
Message Description
CHECK TRAY1
PAPER
(Displaying alter-
nately))
PRESS
MENU/SELECT
• Tray 1 is media empty.
• Media has misfed in Tray 1.
I/C LIFE END • The imaging cartridge has reached the end of its life.
AUTH TIMEOUT • The user is automatically logged off due to IEEE802.1x port authorization.
AIDC ERROR • The AIDC sensor has developed a malfunction of some sort.
BELT ERROR • The printer detected incorrect image position on the image transfer belt.
DUPLEX UNIT
PANEL OPEN
• The duplex option cover is open.
ERROR LOADING
IMAGE
• While updating code, an error has occurred.
TOP COVER OPEN • The top cover of the machine is open.
PAPER JAM
XXXX
• A media jam has occurred at the specified location.
PUT “SIZE” “TYPE”
IN TRAY 1
• The media size set from the printer driver is different from the size of media
loaded in Tray 1.
NOTE
• Load the correct paper on Tray1, and press the Menu Select key, then
specify the [SIZE] and [TYPE] of the paper.
PUT “SIZE” “TYPE”
IN TRAY 2
• The media size set from the printer driver is different from the size of media
loaded in Tray 2.
NOTE
• This message appears when [MAIN MENU]
→
[PAPER MENU]
→
[INPUT TRAY]
→
[AUTO CONTINUE] is set to [OFF].
X TONER LIFE END
REPLACE X
• The X toner cartridge has reached the end of its life.
X TONER MISSING • The specified color of toner cartridge is not installed.
X TONER OUT
• The specified color of toner cartridge is empty.
NOTE
• Appears when [MAIN MENU]
→
[QUALITY MENU]
→
[TONER OUT
ACTION] is set to [CONTINUE].
Message Description
FIRMWARE UPDATE
WRITING ERROR
• Data cannot be written since the flash memory is damaged.
SERVICECALL XX • The engine or controller is faulty.