Konica Minolta magicolor 1600W, Service Manual

Page: 105 / 216

12. MENU (magicolor 1650EN)
Field Service V er. 1.0 Nov. 200 8
68
magicolor 1600W magicolor 1650EN
Adjustment / Setting
F. TRAY CHAINING
G. MAP
(1) MODE
(2) LOGICAL TRAY 0-9
12.3.2 DUPLEX
12.3.3 ORIENTATION
Function • Allows a print cycle to continue without interruption when the current tray runs out of
media during the print cycle by automatically reselecting another tray, in which the
media of the same size and the same type is loaded.
Use • To allow media to be pulled from another tray when the media in the first tray runs
out.
Setting
/procedure • The default setting is YES.
“YES” / NO
NOTE
• This setting is available only when an optional Lower Feeder Unit is installed.
Function • Selects whether or not the tray mapping function is used.
Use • To specify whether trays are mapped.
Setting
/procedure • The default setting is ON.
“ON” / OFF
Function • Specifies whether jobs received from another manufacturer's printer driver are
printed using Tray 1 or Tray 2.
Use • To specify the media source for print jobs using another manufacturer’s printer driver.
Setting
/procedure • Only the default for LOGICAL TRAY 2 is PHYSICAL TRAY 2. PHYSICAL TRAY 1 is
the default for all trays other than LOGICAL TRAY 2.
PHYSICAL TRAY 1 / PHYSICAL TRAY 2
Function • Selects whether or not the duplex print function is used.
Use • To use the duplex print function.
OFF : Duplex printing is not possible.
SHORTEDGE : The pages will be printed on both sides of the media for short-
edge binding.
LONGEDGE : The pages will be printed on both sides of the media for long-
edge binding.
Setting
/procedure • The default setting is OFF.
“OFF” / SHORTEDGE / LONGEDGE
NOTE
• This setting is available only when a Duplex Option is installed.
Function • Specifies the orientation of the media.
Use • To change the orientation of the media.
Setting
/procedure • The default setting is PORTRAIT.
“PORTRAIT” / LANDSCAPE