Konica Minolta magicolor 1600W, Service Manual

Page: 129 / 216

15. SERVICE MENU (magicolor 1650EN)
Field Service V er. 1.0 Nov. 200 8
92
magicolor 1600W magicolor 1650EN
Adjustment / Setting
15.8 PRINT SETTINGS
15.9 BK CLEAR
15.10 FUSER UNLOCK
15.11 CIE COLORSPACE
Function • To print the list of engine adjusted values.
Use • To confirm every adjusted values set at SERVICE MENU.
Setting
/procedure • The default setting is YES.
“YES” / NO
Function • To clear engine information backup data
Use • Use when the engine information backup data is cleared.
YES: Executes data clear
NO: Does not execute data clear
NOTE
• Execute this function to synchronize data when the MFP board or the printer
control board is replaced with a new one.
Setting
/procedure • The default setting is YES.
“YES” / NO
Function • The engine will lock when there are two consecutive increases of fuser warm-up fail-
ures (SERVICE CALL 0500) or Thermistor resistance failures (SERVICE CALL
0503) and the printer cannot be reset by turning the power OFF/ON.
This command resets the lock to restore functionality.
Use
Setting
/procedure • The default setting is YES.
“YES” / NO
1. Enter the SERVICE MENU.
2. Select [FUSER UNLOCK], and press the Menu Select key.
3. Select [YES], and press the Menu Select key.
4. Confirm [POWER CYCLE THE PRINTER NOW] is displayed and turn OFF/ON the
power.
Function • Prints color spaces precisely using CIE standard color instead of CMYK.
CMYK: Improves printing capability (speed)
CIE: Prints color spaces precisely
Use
Setting
/procedure • The default setting is CMYK.
“CMYK” / CIE