E-4
7. Attach the relay circuit board to the plate.
(Two supplied shoulder screws for the relay cir-
cuit board connector)
8. Remove two screws from the board of the copier.
Note:
The two screws removed here will be used to
install the relay circuit board.
9. Screw two supplied shoulder screws for mounting
the relay circuit board into the board of the copier.
10. Attach the relay circuit board assy to the copier
at the position shown in the illustration.
Note:
Insert the connector on the back of the relay circuit
board to the connector of the board of the copier.
11. Secure the relay circuit board assy. (Four
screws)
Note:
Use the two screws removed in step 5 and the two
screws removed in step 8.
12. Connect the supplied image transmission cable
to the copier.
13. Attach the cover removed in step 4. (One screw)
14. Install the cover removed in step 2. (Ten screws)
A4MGIXC013DA
A4MGIXC014DA
A4MGIXC015DA
A4MGIXC016DA
Connector
A4MGIXC017DB
A4MGIXC019DA
Image transmission cable
