E-8
22. Screw the image controller to the cover. (Three
supplied screws A and one supplied screw B)
Note:
Screw the screws at the bottom and side first.
23. Connect the image transmission cable to the
image controller.
Note:
Take care not to excessively bend the image
transmission cable.
24. Connect the copier LAN cable to the port 2 of the
image controller.
25. Route the image transmission cable and the
copier LAN cable through the cable clamps of
the image controller. (Image transmission cable:
two places, Copier LAN cable: one place)
26. Use a network cable to connect port 1 of the
image controller to the hub (LAN).
A4MGIXC033DA
Screw A
Screw A
Screw B
A4MGIXC026DA
A4MGIXC034DA
Port 1
Port 2
A4MGIXC035DA
A4MGIXC036DA
Port 1
Port 2
