Konica Minolta FK-101, Service Manual

Page: 23 / 225

1-11
(25)Instant batch transmission ... All reserved documents to the same remote station are sent in a batch.
(Bundled transmission)
•
Not effective with the job being transmitted.
•
Abbreviated dialing and key-pad dialing are recognized
as a different station even if developed number is same.
(26) Confidential transmission ............... Transmission to the confidential BOX of a remote station by using
the F code (SUB/SID). Appoints the confidential BOX No. by using
SUB. Possible to select the SID sending Yes / No on the control
panel.
(27) Relay request ...................... The relay request by using the F-code (SUB/SID). Appoints the re-
lay BOX No. by using SUB.
(28) Relay transmission .............. The relay transmission by using the F-code (SUB/SID). Registers
final relay stations (group) in the relay BOX in advance. When the
relay BOX is appointed by SUB, transmits to the registered relay
group. After the relay transmission, files in the relay BOX are de-
leted. SID is essential.
1.2.3 Polling
(1) Polled transmission ............. There is one documents which allows the transmission setting.
•
Documents are deleted after transmission.
•
No additional scanning of documents
•
No RADF polled transmission reservation
(2) Polling reception .................. The sequential polling is possible.
210 stations maximum (abbreviated dial
×
200 stations and key pad
dialing
×
10 stations) Appointment of the 24-hour (max.) timer is
possible.
(3) Call turnaround polling ........ No
(4) Called turnaround polling .... Yes
(5) Closed polling transmission No
(6) Selective polling .................. Transmission and reception.
The selective polling by using the F-code (SEP). There is a bulletin
board BOX polling reception. No confidential BOX polling transmis-
sion