Konica Minolta FK-101, Service Manual

Page: 157 / 225

8-17
Actions on the receiver side
1 When SUB is 999, check the following conditions. If possible, perform the memory reception
and complete communications. Then forwards received documents to the remote station
designated by SID.
2 The following are conditions to perform forwarding transmission actions. If these conditions
are not satisfied, a communication error occurs. Refer to the error code section for the error
code.
•
The first four digits of SID are **** and the next is #.
•
The F code forwarding function is enabled.
•
There are no F-code forwarding documents.
3 After reception, the F-code forwarding function setting is automatically set to disabled.
4 At the time of the F-code reception, the forced memory reception, PC reception and auto
transfer settings are neglected.
Forwarding transmission
1 At the time of the F-code transfer transmission, the error page redial, etc. are performed as in
the case of normal transmission.
2 At the time of the F-code transfer transmission, the transmission result report is not output.
Others
1 When the main power is turned OFF / ON during the forwarding transmission waiting, the
forwarding transmission is erased.
2 Writing on the journal at the time of the F code transfer is performed by using FP. You can
switch the journal data logging to ON or OFF. The default setting is logging OFF. When logged,
FWD-KRDS is displayed in the journal remarks.
(address parameter 120002 bit7)