Konica Minolta FK-101, Service Manual

Page: 13 / 225

1-1
1.1 Basic Specifications
1.1.1 General Specifications
(1) Applicable lines ................... PSTN
F network (1300H receptions are possible.Only Japan)
(2) Protocol ............................... Group 3 (compliant to ITU-T T.30)
•
ECM
•
F-code communication
•
Konica non-standard protocol : No
•
Group 4 : No
(3) Maximum data rate .............. 33,600bps
(4) Coding method .................... MH, MR and MMR
(5) Modulation method .............. V27ter, V29, (V.33), V17, V8 and V34
•
V.33 is for reception only.
(6) Communication resolution ... Normal 8
×
3.85 lines / mm
Fine 8
×
7.7 lines / mm
Super fine 8
×
15.4 lines / mm (reception only)
Super fine 16
×
15.4 lines / mm
Fine 200
×
200 pixels / inch
Super fine 400
×
400 pixels / inch
•
Fixed to mm at transmission
•
mm and inch are available at reception.
•
Selection by using the [RESOLUTION] key.
•
You can not change settings on every page.
(7) Fax memory size ................. 2 Mbyte Standard (allocated in the ERDH memory )
•
In case of standard ERDH memory (32Mbyte): 4 Mbyte maxi-
mum. Possible to add in steps of 2 Mbyte
•
In case of ERDH memory expansion (even 1 piece) : 16 Mbyte
maximum.
(8) FAX memory backup ........... Yes Within 60 minutes (when batteries are full)
•
Secondary battery
•
Charging time: 28 hours
•
Life: charging and discharging 5000 times