Konica Minolta FK-101, Service Manual

Page: 14 / 225

1-2
At Sending
At Receiving
Scanner
inch
inch
Communication
mm
Density Conversion
Density Conversion
inch
→
mm
mm
→
inch
inch
→
inch
Communication
mm
Print
inch
inch
(9) Multiple line connection ....... No
(10) Communication time ........... Approx. 3 seconds (Konica standard A4 chart, 28,800bps)
(11) Resolution conversion
1.1.2 Scanning Section
(1) Scanning method ................ Platen documents
•
Possible to scan book documents (book mode)
RADF book documents
•
In case of the platen machine, it is required to attach an RADF
option when the FAX kit is attached.
•
Scanning mode: One sided, Two sided and Cover+2sided
•
Possible to scan the RADF mixed size documents.
(2) Scanning resolution ............. Normal 8
×
3.85 lines/mm
Fine 8
×
7.7 lines/mm
Super fine 16
×
15.4 lines /mm
•
Selection by using the [Resolution] key.
•
You can not change settings on each page.
(3) Mixed size original ............... Possible to mix documents of different sizes.
•
After rotation of images, sizes are changed by EOM every time
the length of the scan line is changed at sending.
•
Possible to mix sizes (A and B).
(4) Density selection ................. Selection by using the [Density] key. [Lighter] / [Darker] / [Normal] / [Auto]
•
You can not change settings on each page.
(5) Maximum scanning document width ..... 297 mm (A3 width) both for RADF and Platen
(6) Maximum scanning document length ... 420mm (A3 length) / (17 inch double letter) in the regular mode
•
800 mm at the maximum Long original mode by ADF