70
Advanced Operations
Sending Relay Broadcast
Before sending documents in a broadcast operation, the 4-digit relay password of the
relay station and 2-digit identification numbers of the remote stations (or groups of
remote stations) must be obtained. After making a relay transmission, the key relay
station can send a report confirming the completion of the broadcast. This report is
sent to the location specified by the telephone number programmed in the Relay Re-
port No. function. For this machine to receive the report, program its telephone num-
ber as the relay report number.
Initiating a Relay Broadcast
1
Load the document(s).
2
Press Menu/Exit to enter Menu.
3
Press
to select Relay Initiate TX, press Enter or .
4
Input password (4-digit number) of key relay station, Enter.
5
Input two-digit numbers of remote stations, Enter.
6
Input desired location using the Speed Dial number or numeric keypad, press
Start.
7
The machine will scan the document(s) into memory and begin faxing to the
key relay station.
8
If all memory is used, the display will show “Memory Overflow”, “Send
Scanned Pages?”
9
To send scanned pages, press Enter.
Programming Relay Report Destination
1
Press Menu/Exit to enter Menu.
2
Press
to select Location Program, press Enter or
.
3
Press
to select Relay Report No., press Enter or
.
4
Input telephone number of desired location using numeric keypad (40 charac-
ters max.), press Enter.
5
Press Menu/Exit to return to standby mode.
Summary of Contents for FAX 9840
Page 1: ...English...
