39
Installation
Memory Reception Mode (MEM): Data from incoming fax communications is
stored in memory even if there is paper loaded in the machine. The Print Opera-
tion function is used to print out the data stored in memory when the machine is in
MEM.
Note: If a memory password has been set (refer to Programming Memory Pass-
word in Customizing Konica FAX9840), this mode cannot be changed to another
mode without first entering the password. After entering the password and switching
between modes, there is no need to enter the password again when printing data
from memory without returning to the standby mode. However, faxes received
and marked for confidential or polling will be stored in memory and not forwarded.
Forwarding Mode (FWD): When set to this mode the machine will receive all
fax communications into memory, and then automatically send the messages to
the telephone number programmed into the Call Forwarding function (refer to
Call Forwarding in Advanced Operations).
PC Mode (PC, optional): This mode is only available when the machine is con-
nected to a personal computer via the optional MFP software. When activated,
the machine does not respond to the ring signal and forwards it directly to the
computer. Fax reception by the computer is enabled upon receiving the call sig-
nal.
Notes: The optional MFP driver must be installed in the computer to use this
function.
Tip: TAD is normally not activated. To have it activated, please contact the local
dealership.
* When the ISDN G4 board is installed and G4 mode activated, neither T/F nor TAD can be selected.
* Only FAX, MEM and FWD can be operated on the G3 dual line side. When the unit is set to another
mode, the unit will operate as a FAX.
To Set Answering Mode
1
Press Menu/Exit to enter Menu.
2
Input speed access no. 10 (Auto Answer), wait
3
Press
or to select the desired mode, press Enter.
4
Press Menu/Exit to return to standby mode.
Summary of Contents for FAX 9840
Page 1: ...English...
