Installation
40
Dial/Incoming Call Parameter Settings
Konica FAX9840 machine offer a multitude of functions that reduce the time required
for manual operation and make fax communications more efficient. Setting the
following options before beginning use of the machine will ensure that it will perform
according to expectations during actual operation.
These settings function in the same manner with the G3 option board.
Dial Parameters
Redialing Tries: Redialing tries are set in one-try steps, the number of which is
adjusted to meet the regulations of the country where the machine is installed
(France, 1-5 tries; Other countries, 0-10 tries). Speed access no. 40.
Redial Interval: The time interval (in 1min units) before redialing is set to meet
the regulations of the country where the machine is installed (France, 1-12min;
Other countries, 1-6min). Speed access no. 41.
Auto Start: With this function set to ON, the machine will automatically begin
dialing as soon as a location is selected by pressing a One-Touch key or entering
another Speed Dial number. There is no need to press the Start key. Available
settings are ON and OFF. Speed access no. 42.
Dial Tone Detect*: This function allows the machine to wait for and detect a dial
tone before dialing. A dial tone is to be detected if set to ON, and need not be
detected if set to OFF. Speed access no. 43.
Busy Tone Detect*: This function allows the machine to detect a busy tone when
sending a fax. The available settings are ON and OFF. Speed access no. 44.
Tone/Pulse (MF/DP)*: This function controls the dialing method of the machine.
There are two common dialing methods; dialing with monotone pulses (pulse
dialing, DP) and dialing with different tones (tone or multiple frequency (MF)
dialing). Available settings are MF and DP. Speed access no. 45
MF (Tone) Duration*: If the machine is set to MF, this function controls the
duration of the tones used for dialing (tone duration varies by country). Available
settings are 75, 85 and 100ms. Speed access no. 49.
Summary of Contents for FAX 9840
Page 1: ...English...
