Konica Minolta Di 200, User Manual

Page: 67 / 138

Initial Steps . . . 3
Di200 3-7
Copying Originals using the Automatic Document Feeder
Feed originals with the automatic document feeder.
1 Set the document guide to the size
of the original.
? Are you copying originals that
are larger than A4?
§
Pull out the document feed tray
extender and the original
stopper.
2 Load up to 70 originals (80 g/m
2
)
into the document feeder. The side
that is to be copied must be up.
? Do you have to load the originals
differently than illustrated here?
§ Define the original document
alignment. For more
information, see page 4-16.
3 Make sure that the stack of originals
does not exceed the maximum fill
height (see
Ä
mark on the document feeder).
4 Push the originals flush up against the feed chamber.
5 Start the copy cycle.
The originals are pulled in starting with the top sheet.
Note the following important information!
Suitable originals for the automatic document feeder are:
Type of originals: • Single sheets of smooth standard paper
• Multiple Page Feed
52.5 up to 81.4 g/m
2
Original size: • 1-/2-sided originals A3 L to A5
• with Mixed Original Detection A3L to A5 C
Original Stopper
Extender