Konica Minolta Di 200, User Manual

Page: 51 / 138

Getting to Know Your Copier 2
Di200 2-35
Placing Copy Paper onto the Single Feed Tray
Use the single document feed tray to feed individual copy sheets, for
example of special paper, into the copier.
1 Load the original into the document feeder. If necessary,
make additional copier settings.
2 Lower the single feed tray.
3 Set the guide plates for the copy
paper width.
4 Place the copy paper directly onto
the tray. The side that is to be
printed must be down.
5
Specify the paper size for type.
For more information, see page 4-6.
6 Start the copy cycle by pressing
the [START] key on the control
panel.
? Does each copy cycle have to be restarted for multiple copies?
§ No. The copy cycle needs to be started only once. The subsequent
copy paper is fed in as it was loaded.
Note the following important information!
Capacity: 1 sheet
Types of paper: Plain Paper, Recycled Paper (60 g/m
2
up to 90 g/m
2
)
Thick paper (91 g/m
2
up to 160 g/m
2
)
OHP transparencies, labels
Paper sizes: max. size 297 × 432 mm
min. size 90 × 140 mm