Konica Minolta Di 200, User Manual

Page: 69 / 138

Initial Steps . . . 3
Di200 3-9
Using the Single Feed Tray (SADF)
The single feed tray can be used to feed originals that cannot be
processed using the duplexing document feeder. To use it, you have to
place the originals on the single feed tray one at a time.
1 Lower the single feed tray cover.
2 Set the document guide to the size
of the largest original.
3
Place the original on the single feed
tray. The side that is to be copied
must be down.
The original is automatically taken
in and copied.
? When can I load the next
document?
§ Do not load the next original
until the [START] button on the
control panel lights green.
Feeding Originals of Different Sizes
For more information see Chapter 3 of the extended manual on the
CD-R.
Loading 2in1 Originals for Page Separation
For more information see Chapter 3 of the extended manual on the
CD-R.
Note the following important information!
Originals suitable for the single feed tray:
Type of originals: • Single sheets of level, plain paper35 g/m
2
up to 200 g/m
2
Original size: • A3L to A5L