Konica Minolta bizhub C451, User Manual

Page: 47 / 620

bizhub C650/C550/C451 (FE3) 2-9
Copy Operations 2
2
Note
A job can also be queued while the machine is warming up after the sub power switch is turned on. For
details, refer to "Scanning during warm-up" on page 2-9.
After the machine has finished warming up, the scanned image will be printed.
The machine takes about 30 seconds to warm up at normal room temperature (23 °C) when the sub
power switch is turned on after the main power switch is turned on.
Scanning during warm-up
1
Press the sub power switch.
– For details on turning on the machine, refer to "Turning off the machine" on page 2-10.
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] key
lights up in blue.
2
Check that the message "Warming up. Ready to scan." appears on the touch panel.
3
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 2-30.
4
Specify any other desired copy settings.
5
Using the keypad, specify the desired number of copies.
6
Press the [Start] key.
– If the "Copy Operating Screen" parameter in the Utility mode was set to "Yes", touch [Next Copy
Job] to display the Basic screen.
– After the machine has finished warming up, the jobs will automatically be printed.
The document is scanned, and the job is added to the list of queued jobs.
?
How can the job being printed be stopped?
% Press the [Stop] key.
!
Detail
While the machine is warming up to begin printing after it is turned on using the sub power switch, copy
settings can be specified and a document can be scanned to reserve a copy job. After the machine has
finished warming up, the copies are automatically printed.
The print order can be changed or jobs can be deleted from the Detail screen of a job from the Current
Jobs list in the Job List screen.