manualshive.com logo in svg

Konica Minolta bizhub C451, User Manual

Share
Download
Konica Minolta bizhub C451 User Manual Download Page 46

2

Copy Operations

2-8

bizhub C650/C550/C451 (FE3)

2.4

Turning on the main power and the sub power

This machine has two power controls: the main power switch and the sub power switch 

Turning on the machine

The main power switch turns on/off all functions of the machine. Normally, the main power switch is turned 
on.

The sub power switch turns on/off machine operations, for example, for copying, printing or scanning. When 
the sub power switch is turned off, the machine enters a state where it conserves energy.

1

Open the main power switch cover, and then set the main 
power switch to "

n

".

2

Close the main power switch cover.

3

Press the sub power switch.

4

Check that the touch panel is turned on.

!

Detail 

When the sub power switch is turned on, the indicator on the [Start] key lights up in orange, and a 
screen indicating that the machine is starting up appears.
After a few seconds, the message "Warming up. Ready to scan." appears on the touch panel, and the 
indicator on the [Start] key lights up in blue, indicating that a job can now be queued.

The default settings are the settings that are selected immediately after the machine is turned on (the 
power switch is set to "

n

") and before any setting is specified from the control panel or touch panel, and 

those that are selected when the [Reset] key is pressed to cancel all settings specified from the control 
panel or touch panel. The default settings can be changed.
The factory default settings are the settings that were selected when this machine was sent from the 
factory.

Summary of Contents for bizhub C451













































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands