Konica Minolta bizhub 163, Service Manual

Page: 92 / 588

Field Service Ver. 1.0 Apr. 2007 6. Other
57
bizhub 163/21
1/220
Maintenance
6.3.25 PH unit
1. Remove the front cover.
See P.43
2. Remove the left cover.
See P.45
3. Remove the rear cover.
See P.47
4. Remove the paper exit tray.
See P.45
5. Remove the rear inside cover.
See P.46
6. Disconnect the flat cable [2] and the
connector [3] from the printer control
board [1].
7. Remove two cable holders [1] of the
flat cable.
CAUTION
• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
A09AF2C565DA
[2]
[3]
[1]
A09AF2C566DA
[1] [1]