Konica Minolta bizhub 163, Service Manual

Page: 524 / 588

Field Service Ver. 1.0 Apr. 2007 6. Mechanical adjustment
23
MB-501
Adjustment / Setting
6.2 Multiple bypass mechanical clutch adjustment
• The assembled position of the collar/coupling on the torque limiter of the paper feed
Mechanical clutch is varied so that the clutch operates properly.
NOTE
• This adjustment is to be made when a paper feed failure occurs in the multiple
bypass.
1. Remove the paper feed mechanical clutch.
See P.13
2. Fit the convex part [2] of the torque limiter [1] to either of three notches [4] of the cou-
pling [3] to install.
3. Fit the convex part B [5] of the torque limiter [1] to either of three notches [7] of the col-
lar [6] to install.
4. Reinstall the paper feed mechanical clutch and make copies using the multiple bypass.
If a paper feed failure occurs again, repeat steps 1 through 3.
4687F2C525DA
[6]
[4]
[3]
[1]
[2]
[5]
[7]