Konica Minolta bizhub 163, Service Manual

Page: 139 / 588

8. Utility Mode Field Service Ver. 1.0 Apr. 2007
104
bizhub 163/21
1/220
Adjustment / Setting
B. TONER REPLENISHER
8.3.5 ADMIN. MANAGEMENT
• The ADMIN. MANAGEMENT will be available by entering the administrator number (6
digits) set by the ADMIN. MANAGEMENT or SERVICE MODE.
(The administrator password is initially set to “000000.”)
<ADMIN. MANAGEMENT mode setting procedure>
1. Press the Utility key.
2. Select “ADMIN. MANAGEMENT.”
3. Type the 6-digit administrator number and press the [OK] key.
A. ADMINISTRATOR NO.
B. AUTO SHUT OFF
Functions • To execute Toner replenishment forcibly to adjust the tone to the T/C level set.
Use • To be used when a large number of copies are made for the original with high density
and ID is deteriorated due to the decrease of T/C ratio.
Setting/
Procedure • When [TONER REPLENISHER] is executed, the machine first detects the current
toner density. If it is found that the density is lower than the reference value, supply of
toner is replenished and then toner is agitated. If the density is found to be higher
than the reference value, the machine simply agitates toner to complete the
sequence.
<Step>
1. Select [TONER REPLENISHER] and press the [OK] key.
2. The toner replenisher sequence is automatically terminated after a given period of
time or when the specified toner density is recovered. Then, the initial screen reap-
pears.
Functions
• To change the Administrator number currently registered to the other number.
Use
Setting/
Procedure 1. Select [ADMINISTRATOR NO.] and press OK key.
2. Input the administrator number currently registered with the numeric keypad, and
press OK key.
3. Input the administrator number newly registered with the numeric keypad, and press
OK key.
4. Input the administrator number currently registered again with the numeric keypad,
and press OK key.
Functions
• To enable or disable the setting of auto shut OFF.
Use
Setting/
Procedure • The default setting is ENABLE.
DISABLE “ENABLE”