Konica Minolta bizhub 163, Service Manual

Page: 389 / 588

2. Periodical check Field Service Ver. 1.0 Apr. 2007
6
DF-605/MK-501
Maintenance
4. Remove two levers [1].
5. Remove five C-rings [2].
6. Remove the arm [3].
7. Remove the belt [4].
8. Remove two pick-up rollers [5].
9. Remove the C-ring [1], and remove
the gear [2] and the bushing [3].
10. Remove two pins [4].
11. Remove the feed roller [5].
NOTE
• Use care not to lose the pin.
12. To reinstall, reverse the order of removal.
2.1.2 Replacing the separation roller
A. Periodically replaced parts/cycle
• Separation roller: Every 200,000 prints
1. Open the upper door [1].
2. Hold the [1] sections in the figure,
and remove the cover [2].
4344F2C503DA
[1]
[2]
[3]
[5] [4]
[2]
[5]
4344F2C504DA
[1]
[4]
[5]
[2]
[3]
4344F2C500DA
[1]
4344F2C505DA
[1]
[1]
[2]