Konica Minolta bizhub 163, Service Manual

Page: 333 / 588

8. Soft Switch Set Field Service Ver. 1.0 Apr. 2007
76
FK-506
Adjustment / Setting
8.6.21 SOFT SWITCH: #21
• Bit 1-2: T1 indicates the calling time after dialing, can adjust the T1 time longer by
changing the default value. The default T1 timer depends on each country regulation.
• Bit 3: Some old machines can not accept DIS command over 4 bytes, and every time will
become fail. In this case you can set this bit to 1. If this bit is set to 1, JBIG and V8 capa-
bility will be disabled automatically.
• Bit 6-7: A fax to be received is canceled and the machine becomes unable to receive it if
the setting of “No. of RINGS” is made longer than the setting of “CNG duration after dial-
ing.” Be sure to make the “No. of RINGS” setting to a value shorter than the “CNG dura-
tion after dialing” setting.
• Bit 8: Sender machine’s name will show on the other party’s LCD or print on the report if
remote side is the same model.
Bit
No.
Designation Function
Initial
Setting
Bit HEX
8 NSS signal before DCS
0: Not to send NSS signal if remote side is same
model
1
C
1: Send NSS signal if remote side is same model
7
CNG duration after dial-
ing (T1)
1
6 0
5 T4 timer
0: 3.0 sec – Normal case
0
1: 4.5 sec
4 Reserved Reserved 0
0
3 DIS signal length
0: Normal length (bit 1 to 64)
0
1: 4 bytes DIS command – bit 1 to 32 only
2
Increase default T1 tim-
ing during calling
0
1 0
Duration 40 sec 60 sec 70 sec 120 sec
Bit 7 0 0 1 1
Bit 6 0 1 0 1
Descrip-
tion
T1 sec T1+ 30 sec T1+ 40 sec T1+ 60 sec
Bit 2 0 0 1 1
Bit 1 0 1 0 1