Konica Minolta bizhub 163, Service Manual

Page: 138 / 588

Field Service Ver. 1.0 Apr. 2007 8. Utility Mode
103
bizhub 163/21
1/220
Adjustment / Setting
C. PAPER TYPE
* Appears only when the AD-504 (bizhub 211 only) is installed.
8.3.3 CUSTOM SIZE MEMORY
8.3.4 USER MANAGEMENT
A. DRUM DEHUMIDIFY
Functions • To set the special paper type of each tray.
Use • To set whether [Auto paper select]/[Auto tray change] is used for each tray according
to the paper type to be used.
• The combination of [Auto paper select]/[Auto tray change] can be selected according
to the paper type (“PLAIN”, “RECYCLE”, “SPECIAL”).
PLAIN: Auto paper select can be selected. Auto tray change is available.
RECYCLE: Auto paper select cannot be selected. Auto tray change is available.
SPECIAL: Auto paper select cannot be selected. Auto tray change is not available.
NOTE
• Tray 2 to 5 can be set only when the optional PF-502 is mounted.
Setting/
Procedure • The default setting is PLAIN.
<Step>
1. Select the paper source.
2. Select the type of paper.
“PLAIN” RECYCLE SPECIAL 1-SIDE*
Functions • To set the custom size paper commonly used.
Use • When setting the paper size of Tray 1 after selecting [Utility]
→
[PAPER SOURCE
SETUP]
→
[TRAY1 PAPER], the size registered with this memory setting will be
available.
• Up to 2 digits can be set (MEMORY 1/MEMORY 2)
Setting/
Procedure 1. Select [CUSTOME SIZE MEMORY] and press OK key.
2. Select [MEMORY 1] or [MEMORY 2] and press OK key.
3. Input the paper size with the numeric keypad.
Functions • To run a drum dry sequence.
Use • The drum dry sequence is run when an image problem occurs due to condensation
formed on the surface of the PC drum as a result of a sudden change in temperature
or an increased humidity.
Setting/
Procedure <Step>
1. Select [DRUM DEHUMIDIFY] and press the [OK] key.
2. The drum dry sequence is automatically terminated after the lapse of a predeter-
mined period of time and the initial screen reappears.