Konica Minolta 7416MFG Advanced Information Download Page 217

Page: 217 / 285

When a Message Appears

8-2

7416MFG

Loading Paper into Tray1

Remove the Bypass Tray.

Load the paper in the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.

Attach the Bypass Tray in its
original position.

Loading Paper into the Bypass Tray

Load the paper so that the front side
of the paper (the side facing up
when the package was unwrapped)
faces up.

Note
The Bypass Tray can be loaded with a maximum of 1 envelope, 1
OHP transparency, 1 card, or 10 sheets of plain paper.

Summary of Contents for 7416MFG






























































































































































































































































































Search results

Summary of Contents for 7416MFG

Reviews:

Related manuals for 7416MFG

Brands by name

Popular brands

Konica Minolta 7416MFG, Advanced Information

Search results

Summary of Contents for 7416MFG

Reviews:

Related manuals for 7416MFG

Brands by name

Popular brands