Konica Minolta 7416MFG Advanced Information Download Page 146

Page: 146 / 285

Using the Utility Mode

7416MFG

7-11

Specifying the Setting for “TRAY1 PAPER”

Select the “TRAY1 PAPER”.

Refer to “Selecting the “PAPER SOURCE SETUP” menu” on
page 7-10.

Press the [

] and [

] keys until the

type of paper loaded is selected.

Press the [Yes] key.

Press the [

] and [

] keys or press

the [

] key to select the size of

paper that is loaded. If “CUSTOM”
is not selected, continue with step 8.

If “CUSTOM” is selected,
perform steps 5 through 8.

Note
If “OHP” was selected in step 3,
the only paper sizes that can be
loaded are A4 L and Letter L.

Tip
Pressing the [

] and [

] keys moves “

” to select the paper

size.

To return to the previous message, press the [No] key.

DENSITY SET

ZOOM

DENSITY SET

Summary of Contents for 7416MFG






























































































































































































































































































Search results

Summary of Contents for 7416MFG

Reviews:

Related manuals for 7416MFG

Brands by name

Popular brands

Konica Minolta 7416MFG, Advanced Information

Search results

Summary of Contents for 7416MFG

Reviews:

Related manuals for 7416MFG

Brands by name

Popular brands