Konica Minolta 0862 Operation Manual Download Page 98

Page: 98 / 200

Ch.4 Description of Screens

< 96 >

REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2

[CANCEL] Button

Cancels the patient data adjustment mode.

• Display returns to the examination list screen.

[OK] Button

Patient data is modified.

• Display returns to the examination list screen.

Parameters may be selected for extraction of patient data from the examination list screen."Hospital
Department", "Location(Ward)" or "Exam. Room" may be used as parameters for extraction.

• If more than one of the parameters for extraction "Hospital Department" "Location(Ward)" or "Exam. Room" are

set, patient data matching all the set parameters will be extracted.

Extraction Parameter Screen

[Hospital Department] Button

Used to select "hospital department" parameters.

[Location(Ward)] Button

Used to select "location(ward)" parameters.

[Exam. Room] Button

Used to select "exam. room" parameters.

Allows input of new
extraction parameters
using CS-3.

Examination

List

Screen

Extraction

Parameter

Screen

Summary of Contents for 0862









































































































































































































Search results

Summary of Contents for 0862

Reviews:

Konica Minolta 0862, Operation Manual, Page: 98 / 200

Search results

Summary of Contents for 0862

Reviews: