Konica Minolta 0862, Operation Manual, Page: 102 / 200

Ch.4 Description of Screens
< 100 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
[Schedule] button
Used to set an order where parameters are registered
in patient data.
• Pressing this button just results in setting the parameter
in the patient data, the examination itself will not be car-
ried out.
• The display returns to the initial screen (examination
search or examination list screen).
[CANCEL] Button
Cancels the parameter setting mode.
• The display returns to the examination list screen.
[OK] Button
Used to register the selected parameter in the order
and initialize examination.
• The display returns to the examination check screen.
Once the order is
exposed and completed
on the Examination
Check Screen, it cannot
be deleted.
However, when it is not
output yet, it can be
deleted by abolishing
the image using [NG]
button.
Returning to the initial
screen using the
[Schedule] button will
result in automatic set-
ting of the examination
time and date for sup-
plementary exposure
data.
p.81, 85
Examination
Check
Screen
[Single-Image
Screen]
[Multiple-
Image Screen]
[Delete] Button
Used to delete an order where parameters have
already been registered.
Touch the order to be deleted on the
order list.
(The order will be displayed in a
green frame.) Touch the [Delete] button.
To delete parameters registered in an order
When exposure parameters are selected in transition from the initial screen,
the parameters selected from the exposed part/parameter selection screen
may be re-aligned as follows on the examination search screen: upright para-
meter->recumbent parameter->cassette parameter.