Konica Minolta 0862, Operation Manual, Page: 55 / 200

Ch.3 Sequence of Examination
< 53 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
1 on 1 Output Procedure
1
Expose following the normal procedure.
2
Touch the image display area for which "1 on 1
output" is to be carried out.
• A detailed data setting screen (image processing)
will be displayed.
3
Touch the "Print Format" tab.
• A detailed data setting screen (print format) will be
displayed.
4
Touch the "1 on 1" button in the "Print Format" col-
umn and select the direction in which the two
images are to be aligned.
• The white "A" character represents the printed
position of the Primary image, the gray "A" charac-
ter that of the Secondary image.
5
Set "Film Size", "Orientation" and "Mag. Method"
under the "Trimming" item.
6
Touch the "Image Processing" tab.
• A detailed data setting screen (image processing)
will be displayed.
(When "AA" is selected)
p.36-44 Exposure
If there are images for
which examination has
been completed, the 1
on 1 output can be car-
ried out through the
examination history
screen.
7
Touch the [Secondary] button.
• Check the image to be output as a secondary
image.
• Image processing or ROI may be changed.
"2 on 1 Output" is possible only when the following conditions are satisfied:
• Images must belong to the same examination order.
• The setting "film size" under the print format tab must be identical.
• The setting "direction" under the print format tab must be identical.
• The setting "print format" under the print format tab must be identical.
When "equal-size output" has been selected as the method of image output and the
size of the image read exceeds the output field, the image is trimmed.
Trimming is carried out using the centre of the image read as base.
User tools may be utilized to change the trimming position.
When "full-size output"
has been selected as
the method of image
output and the size of
the image read
exceeds the output
field, the image size is
reduced.
2
3
4
5
6
7